• Putting ideas into practice - worldwide

    Global enthusiasm for a joint theme

  • THE STUFF THAT CHANGE IS MADE OF

    EDAG LIGHT COCOON – POSSIBLE PARADIGM SHIFT FOR FUTURE MOBILITY

  • IN THE DRIVING SEAT?

    SMART DEVELOPMENT ALWAYS ALSO KEEPS AN EYE ON CULTURAL REQUIREMENTS

Vehicle development

With our vast experience covering the complete spectrum of engineering applications, we are experts in vehicle development. It is therefore essential for us to keep an eye not only on the big picture, but also on the all-important details. From preliminary development and series development to series support after the start of production of individual parts, modules and the development of complete vehicles - we combine expert knowledge with the latest lightweight construction material technology trends.  For you, this means an optimum implementation of your vehicle concepts, both technically and economically. From the module to the complete vehicle: with us, your engineering challenge is in good hands.

Package & concepts

The art of the package lies in arranging the components and modules in the vehicle. Not just any old how, but in such a way as to ensure that geometrical and functional requirements are met. Today's cars have intelligent module structures that make it possible to provide the high number of vehicle variants demanded.

more

This is one area in which you need the help of an engineering partner who, apart from making optimum use of the space available, will also look for the vehicle architecture that will provide the best possible ergonomic, assembly and maintenance properties. Besides this, we also carrying out complete vehicle benchmarking, to compare and assess concept-defining dimensions with competitors' vehicles for you.

 less

Body in white

New materials, new steel qualities, design amendments – in the course of time, a great many different challenges and technologies have had their effect on a vehicle's body in white.

more

The aim is always the same: optimum product properties at minimum cost and weight. Our task is to ensure that no conflicting aims arise between these new requirements and quality standards. And, of course, bearing the subsequent production in mind. We call this production-optimised development.

The first stage is usually virtual. We simulate the development concepts in order to optimise their stiffness, strength, safety, crash performance and of course feasibility. Following this, our test department carries out the validation process.

The development procedure is part of our tried and tested process landscape. From the approval procedure, parts list and the monitoring of deadlines, cost and weight, to change management, assembly support and supplier management – we accept responsibility for the development of complete bodies in white, and act as a system integrator at all relevant interfaces.

 less

Doors, lids, gates

Over the years, door, lid and gate systems have developed into highly complex modules.
The aim is to meet not only the technical, but also the ergonomic and legal requirements of the module. 

more

To ensure that the design will not have to be altered at a later date, attention is paid to the joints and to assuring technical feasibility during the design validation phase.

Our development work focuses just as much on areas such as acoustics (e.g. wind noise) or ease of locking as it does, for instance, on pedestrian protection: from the concept phase, design, simulation and validation, through to the finished series product.  

In addition, we also work on innovative material concepts for vehicle manufacturers and system suppliers, to meet product requirements that might not yet be important, but very soon will be.

 less

Interior

The customer's comfort plays a central role in the development of interior components. The car needs to feel right as soon as he gets into it for the first time. A feeling that is typical for that particular brand of car and clearly distinguishes it from other brands. At EDAG, we know what to do to ensure that the first, decisive impression is positive.

more

And, of course, we know that it is not simply a matter of the quality of the materials and how they are used. Much more to the point, we bring quality, functionality, ergonomics, producibility and stringent safety requirements into line with each other. And, of course, we also keep an eye on costs, deadlines, product specifications and legal requirements.

From the earliest stages of a project, we apply ourselves to matters such as styling feasibility, space and ergonomic tests and the drawing up of technical specifications, to ensure that the interior will make this decisive impression: and this pays off. At later stages, our experienced, in-house engineers continue this process with the design layout of the components and modules, including, for instance, the instrument panel or door trims.

Depending on what has been agreed with regard to responsibility for the project, we can take on the management of the system suppliers for you, and responsibility for module development with the achievement of functional targets.

We offer the following solutions and services to meet your needs:

  • Project and interface management
  • Benchmark analysis
  • Package and concept development
  • Design validation
  • Prototype and series design
  • Functional integration and validation
  • Creation of component specifications and guaranteeing adherence to these
  • Supplier and development management (design, GD&T, deadlines, costs, weight, simulation, test & validation)
  • Guaranteeing legal and in-house requirements
  • Data management
  • Prototype assembly and SOP support
  • Continual quality surveillance and improvement (lessons learned, problem tracking)
  • Guaranteeing and adherence to product targets
 less

Exterior

What applies for the interior applies equally for the exterior: the outward appearance presented by a car must conform with the values typical of the particular brand. The same also applies to the development of the add-on parts. For spoilers, panels, windows, glass roof systems or complete modules, e.g. bumper systems, we are the engineering specialists for add-on parts.

more

In addition, working within a network of OEMs, suppliers and tool makers, we also guarantee active and passive safety requirements, for instance for passenger and pedestrian protection.

We offer the following solutions and services to meet your needs:

  • Project and interface management
  • Benchmark analysis
  • Package and concept development
  • Design validation
  • Prototype and series design
  • Functional integration and validation
  • Creation of component specifications and guaranteeing adherence to these
  • Supplier and development management (design, GD&T, deadlines, costs, weight, simulation, test & validation)
  • Guaranteeing legal and in-house requirements
  • Data management
  • Prototype assembly and SOP support
  • Continual quality surveillance and improvement (lessons learned, problem tracking)
  • Guaranteeing and adherence to product targets
 less

Light & Sight

There is probably no component that makes a more marked contribution to the appearance of a car than its lights. They give a vehicle character and its own unique expression. Whether they are refined, grand, friendly or even aggressive - the lights are the "eyes" of a car, and are today optimised to give the desired effect.

more

For us, light development begins with the first design studies, followed by extensive simulation methods. Using specially designed software tools, we analyse and optimise the target light design so that it is physically correct. The advantage of this virtual simulation is that the impression the lights will later make can be examined well before the first prototype is made. Apart from dealing with the layout of optical components, the virtual validation of legal requirements is also carried out here. After prototype or series design, control units and the appropriate software are developed in the Electronics department. To guarantee the operational reliability of the components while they are being operated, we then carry out a complete thermal design with the most suitable cooling processes and material tests. Both for complete systems and for components

We offer the following solutions and services to meet your needs:

  • Design studies
  • Light visualisation and simulation for prototype and series production
  • Functional, ambient and accent lighting
  • Design validation
  • Design prototyping and show car lights
  • Prototype and series design
  • Physical layout
  • Hardware and software development
  • E/E for concept and show cars
  • Headlight conversions
  • Thermal systems, engineering and simulation
  • Material testing
  • Certification ability
 less

Chassis / Driving dynamics

Even the chassis of the future will be increasingly smarter and more efficient. It defines no longer just the vehicle with its typical driving behavior, it also became an important part of any strategy to reduce CO2 emissions. New lightweight materials are used in the chassis and all components are increasingly more interconnected with actuators and sensors. This comes all together to smart, forward-looking chassis system.

more

Combined with new technologies such as autonomous driving or the networking and its impact on the chassis of the future, we will help you to keep on track. We take over or support you from the concept and system development of chassis, the simulation, the validation and testing up to project and supplier management.

For your tasks, we offer the following services:

  • Development of chassis designs for cars and motorbikes as well as their integration
  • Driving dynamics and ride comfort development
  • Simulation of the chassis in the total vehicle model
  • Concept and system development of axle and steering systems
  • Development and integration of brake systems
  • Development of active suspension systems and driver assistance systems
  • Integration of the wheels and tires
  • Fuel system development and SCR systems
  • Suspension tuning and testing
 less